How to Fill Fresh Water Tank in RV
Filling the fresh water tank in your RV is a crucial step to ensure that you have a constant supply of clean water for drinking, cooking, and other everyday needs. Whether you’re embarking on a road trip or simply enjoying a weekend getaway, knowing how to properly fill your RV’s fresh water tank is essential for a comfortable and hassle-free experience. In this article, we will guide you through the process of filling your RV’s fresh water tank step by step.
1. Locate the Fresh Water Tank
The first thing you need to do is locate the fresh water tank in your RV. Typically, the tank is located under the kitchen sink or in a compartment accessible from the exterior of the RV. Check your RV’s manual for the exact location, as it may vary depending on the make and model.
2. Turn Off the Water Supply
Before you begin filling the tank, it’s important to turn off the water supply to prevent any leaks or spills. Locate the water shut-off valve, which is usually found near the fresh water tank or at the city water connection point. Turn the valve clockwise to close it.
3. Attach the Water Hose
Next, attach a fresh water hose to the RV’s water connection point. This is usually a brass fitting located near the fresh water tank. Make sure the hose is securely fastened to prevent any leaks.
4. Open the Tank Cap
Locate the cap on the top of the fresh water tank. It may be labeled “fresh water” or have a symbol indicating water. Unscrew the cap and set it aside in a safe place.
5. Fill the Tank
Turn on the water supply and start filling the tank. You can do this by turning the water on full force or by adjusting the flow with the RV’s water control valve. Monitor the tank level through the viewing window or by feeling the tank, and stop filling when the tank is approximately three-quarters full. This allows room for expansion and to prevent water from spilling over.
6. Clean the Tank
It’s a good practice to clean your fresh water tank periodically to remove any sediment or contaminants. Once the tank is full, turn off the water supply and remove the hose. Open the cap and pour a mixture of water and white vinegar into the tank. Swirl the mixture around with a long stick or brush, then flush the tank with clean water. Be sure to empty the tank completely before refilling it with fresh water.
7. Secure the Tank Cap
After filling and cleaning the tank, securely replace the cap and tighten it. This will prevent any leaks or contaminants from entering the tank.
8. Test the System
Before leaving the campsite or RV park, it’s essential to test the water system. Turn on the water faucets in the RV to ensure the water pressure is adequate and that there are no leaks. If everything seems to be working properly, you can now enjoy your fresh water supply while on the road.
By following these steps, you can easily fill your RV’s fresh water tank and ensure a comfortable and enjoyable trip. Always remember to keep your tank clean and check the water pressure regularly to avoid any unexpected issues during your travels.
