How to Program Key Fob with Autel Maxisys
In today’s fast-paced world, car owners often find themselves in need of programming a new key fob for their vehicles. The Autel Maxisys is a versatile diagnostic tool that can help you with this task efficiently. Whether you’re a professional mechanic or a DIY enthusiast, learning how to program a key fob with the Autel Maxisys can save you time and money. In this article, we will guide you through the process step by step.
Step 1: Prepare the Necessary Equipment
Before you begin, ensure that you have all the necessary equipment. You will need the following:
– Autel Maxisys diagnostic tool
– Original key fob
– Replacement key fob (if needed)
– OBD (On-Board Diagnostics) cable
– Vehicle’s battery (fully charged)
Step 2: Connect the Autel Maxisys to Your Vehicle
Start by connecting the Autel Maxisys to your vehicle using the OBD cable. Make sure the vehicle is turned off and the key is removed from the ignition. Once connected, the Autel Maxisys will automatically detect the vehicle and display its information on the screen.
Step 3: Access the Key Programming Menu
Navigate to the “Key Programming” menu on the Autel Maxisys. This menu is usually located under the “Vehicle” or “System” tab. Select the appropriate vehicle make and model to proceed.
Step 4: Program the Original Key Fob
If you have the original key fob, you will need to program it first. Follow these steps:
1. Insert the original key fob into the vehicle’s ignition.
2. Turn the key to the “ON” position and wait for a few seconds.
3. Press and hold the “Learn” button on the Autel Maxisys until the key fob is successfully programmed.
4. The Autel Maxisys will display a confirmation message on the screen.
Step 5: Program the Replacement Key Fob (If Needed)
If you need to program a replacement key fob, follow these steps:
1. Insert the replacement key fob into the vehicle’s ignition.
2. Turn the key to the “ON” position and wait for a few seconds.
3. Press and hold the “Learn” button on the Autel Maxisys until the key fob is successfully programmed.
4. The Autel Maxisys will display a confirmation message on the screen.
Step 6: Test the Key Fob
After programming the key fobs, it’s essential to test them to ensure they work correctly. Turn the key to the “ON” position and try to start the engine. If the key fob works, you have successfully programmed it using the Autel Maxisys.
Conclusion
Programming a key fob with the Autel Maxisys is a straightforward process that can be completed in a few simple steps. By following this guide, you can save time and money by avoiding costly visits to a professional mechanic. Whether you’re a professional or a DIY enthusiast, the Autel Maxisys is an invaluable tool for car owners who need to program key fobs.
