How to Program Subaru Garage Opener
Garage openers are a convenient and secure way to access your Subaru. Programming the garage opener is a straightforward process that can be completed in just a few simple steps. Whether you’re a new Subaru owner or just need a refresher, this guide will walk you through how to program your Subaru garage opener.
Step 1: Locate the Programming Button
First, locate the programming button on your Subaru garage opener. This button is typically located on the back of the garage door opener unit. It may be labeled “Learn,” “Program,” or have a small light indicator.
Step 2: Turn Off the Power
Before starting the programming process, it’s essential to turn off the power to the garage door opener. This can be done by unplugging the unit from the electrical outlet or by turning off the circuit breaker that controls the power to the garage door opener.
Step 3: Press the Programming Button
With the power off, press and hold the programming button on the back of the garage door opener unit. Keep holding the button until you hear a click or see a light indicator turn on. This indicates that the opener is in programming mode.
Step 4: Press the Button on Your Subaru
While still holding the programming button on the garage door opener, press the button on your Subaru that controls the garage door. This button is usually located on the driver’s door or dashboard. Hold the button down for about 3-5 seconds, then release it.
Step 5: Verify the Garage Door Opens
After releasing the button on your Subaru, the garage door should open. If it does, the programming is successful. If the door does not open, repeat steps 3-5 until the door opens.
Step 6: Test the Garage Door Opener
To ensure that the garage door opener is functioning correctly, test it by pressing the button on your Subaru again. The garage door should open and close as expected.
Step 7: Reset the Opener (Optional)
If you need to reset the garage door opener for any reason, you can do so by pressing and holding the programming button on the back of the unit for about 10 seconds. This will clear any previous programming and put the opener back in programming mode.
By following these simple steps, you can successfully program your Subaru garage opener. Remember to keep the programming button on the opener held down while pressing the button on your Subaru to ensure proper programming. With your garage opener programmed, you can enjoy the convenience and security of accessing your Subaru with ease.
