How to Program DirecTV Remote Genie
Are you struggling to program your DirecTV Remote Genie to control multiple devices? Don’t worry; you’re not alone. Programming the DirecTV Remote Genie can be a bit daunting at first, but with the right steps and guidance, you’ll have it up and running in no time. In this article, we’ll walk you through the process of programming your DirecTV Remote Genie, ensuring that you can enjoy seamless control over your entertainment system.
Step 1: Ensure You Have the Right Equipment
Before you begin programming your DirecTV Remote Genie, make sure you have all the necessary equipment. You’ll need the following:
– DirecTV Remote Genie
– DirecTV receiver
– Devices you want to control (e.g., cable box, satellite box, Blu-ray player)
– Remote control codes for the devices you want to control
Step 2: Connect the DirecTV Remote Genie
To start programming your DirecTV Remote Genie, you’ll need to connect it to your DirecTV receiver. Follow these steps:
1. Locate the infrared (IR) port on the back of your DirecTV receiver.
2. Plug the IR cable from the DirecTV Remote Genie into the IR port on the receiver.
3. Power on your DirecTV receiver and the DirecTV Remote Genie.
Step 3: Program the DirecTV Remote Genie
Now that your DirecTV Remote Genie is connected, it’s time to program it. Here’s how to do it:
1. Press the “Setup” button on your DirecTV Remote Genie.
2. Enter “981” on the number pad to access the programming menu.
3. Press the “OK” button to confirm.
4. Select “Programming” from the menu options.
5. Choose “Programming” again to enter the programming menu.
6. Select “Device” to choose the device you want to program (e.g., Cable Box, Satellite Box, Blu-ray Player).
7. Enter the remote control code for the device you want to control using the number pad. You can find these codes in the DirecTV Remote Genie manual or by searching online.
8. Press the “OK” button to confirm the code.
9. Follow the on-screen instructions to program the DirecTV Remote Genie for the selected device.
Step 4: Test the DirecTV Remote Genie
Once you’ve programmed the DirecTV Remote Genie for your devices, it’s essential to test it to ensure everything is working correctly. Here’s how to test it:
1. Press the “Power” button on the DirecTV Remote Genie to turn on the device you programmed.
2. Use the DirecTV Remote Genie to change channels, adjust volume, or perform other commands to ensure the device responds as expected.
Step 5: Repeat for Other Devices
If you have multiple devices you want to control with the DirecTV Remote Genie, repeat steps 3 and 4 for each device. Remember to enter the appropriate remote control code for each device.
Conclusion
Programming your DirecTV Remote Genie may seem like a complex task, but with these simple steps, you’ll be able to control multiple devices with ease. Enjoy the convenience of having a single remote to rule them all!
